HDHT Plastic Metals are designed for repair and maintenance work of simple and effective solutions. Just simple mixing evenly, after curing, temperature resistance is -35~120°C, magic steel series products resistant to alcohol and ester solvents, most of the salt water, oil, acid and alkali, and does not contain solvents, curing almost does not shrink. After curing, can be drilled and tapped, and paintable without surface treatment. Apply to the following materials: metal, wood, glass, ceramics, concrete, etc.

- Two component epoxy, putty
- For repairing the corrosion and damage of casting, pipe, oil tank
- For repairing the crack of machine and oil tank
- Making mould, modle, tools and crane devices
- Can be machined after curing

- Two components, fill with super hard ceramic and metalized carbon particle, very good adhesion on material surface
- Good electrical insulation
- For repairing the equipments wearing by the particals diameter below 3mm, eg. slurry pump, water pump, etc.
- After curing, the anti-wearing property is 2-8 times compare to casting iron.

- Two components epoxy putty
- The color is close to casting aluminum
- For repairing defects of casting aluminium and light metal alloy
- Non-corrosion, anti-magnetic
- Can be machined after curing

- Two component putty epoxy
- The color is close to brass
- For repairing defects of brass
- Replace or repair the brass weldment
- Can be machined after curing, or bonding other metal

- 用于高负荷颗粒磨损设备的大面积修复及预保护, 如高含砂量的泵、管道、弯管
- 固化快, 立面不流淌
- 与金属、水泥、陶瓷均有良好的粘接力

- 双组份环氧系统
- 触变性粘度, 立面不流淌;固化后表面光滑耐磨
- 耐一般强碱强酸性能优良
- 用于修复与保护受腐蚀的泵、阀、罐、釜、管道等如热交换器、冷凝器、冷却泵叶轮等
- 大的孔洞和破损点, 应先用PM1201/1202填充

- 双组分环氧胶粘系统, 膏状
- 在湿气中、潮湿表面和水下, 具有极高的粘接强度
- 用于紧急修补阀门, 管道, 箱体, 泵壳等孔洞
- 船舶与近海工业
- 污水站、造纸工业等

- 双组分环氧胶粘系统
- 粘接和修补铸件和金属零件
- 填充孔, 修补破损的孔洞和机械零件
- 密封泵和管
- 适用于高温场合的零件修复